User`s guide

Setting Up the DCE Manager
1-8
7800-A2-GB26-80
May 1999
5. Start the install program.
— If you downloaded the software from the World Wide Web, change to the
directory where you uncompressed the file and run the installation
program:
cd <directory>
./DCEinstall
— If you mounted the CD-ROM for HP systems:
cd /tmp/cdrom/DCE/HP-UX10
./DCEinstall
— If you mounted the CD-ROM for Sun systems:
cd /tmp/cdrom/DCE/SOLARIS2
./DCEinstall
6. Respond to the installation prompts. The prompts vary depending on whether
or not the DCE Manager is currently installed on your system.
— If the DCE Manager is currently installed on your system, the following
prompt appears:
Do you want to remove the existing product? (y/n)
Enter y to remove the installed version of the DCE Manager. After
removing the installed version, the installation process asks if you want to
install the DCE Manager. You must enter y to continue.
Enter n to stop the installation.
— If the DCE Manager is not installed on your system, the following prompt
appears:
Do you want to install OpenLane DCE Manager? (y/n)
Enter y to continue the installation.
Enter n to stop the installation.
7. Enter the product serial number, which is printed on the Software License
Agreement distributed with the product:
Please enter the product serial number: