User`s guide

Setting Up the DCE Manager
1-4
7800-A2-GB26-80
May 1999
Preparing to Install the DCE Manager
Before you install the OpenLane DCE Manager Release 4.3, check the contents
of the distribution package and ensure that your system meets the requirements
as outlined in the following sections.
In addition to the requirements listed, read the OpenView or NetView release
notes, which provide the latest information on the use of each product.
H For HP-UX and Solaris systems:
/opt/OV/ReleaseNotes/attGEM/attGEMr1.rn
H For AIX systems:
/usr/OV/ReleaseNotes/attGEM/attGEMr1.rn
Verifying the Contents of the Distribution Package
The DCE Manager software and documentation are available on the World Wide
Web. However, in certain instances, a distribution package is made available,
which consists of the following:
H DCE Manager, distributed on CD-ROM (for either OpenView or NetView)
H
OpenLane DCE Manager User’s Guide (this manual) , which provides details
on installing and using the DCE Manager
H Software License Agreement, which specifies the product serial number
H Software License Key Request form, which you must fill out and fax to the
specified location to obtain a license key
Retain the Software License Agreement and the Software License Key, as both
are needed during installation or if you place a call for service.
Verifying Software Requirements
The DCE Manager software can be installed on the following operating platforms:
H Solaris 2.5 or higher for Sun systems
H HP-UX 10.10 or higher for HP systems
H AIX Release 4.1.4 or higher for IBM systems
Depending on the operating platform you are using, you must also have the
following software available on your system:
H HP OpenView Network Node Manager, Release 5.01 or higher, with the
highest consolidated patch (for Solaris and HP-UX systems only)
H NetView for AIX Release 4 or 5 (for AIX systems only)
H Tooltalk, which is a part of the Common Desktop Environment (CDE) toolset