User`s guide

Index
IN-4
7800-A2-GB26-80
May 1999
F
FrameSaver devices, discovering remote site units, 2-3
H
hardware requirements, 1-5
Health and Status dialogs, 5-11
Help menu, contents of, 2-8
Hewlett-Packard, Network Node Manager, 1-4
HP OpenView, 1-4
accessing DCE Manager, 1-15
requirements, 1-6
HP-UX systems
installing DCE Manager, 1-7
kernel parameter settings, 1-5
OpenView requirements, 1-6
I
injection table, modifying, 4-7
installation
checking distribution contents, 1-4
hardware requirements, 1-5
network requirements, 1-5
on AIX systems, 1-10
on HP-UX and Solaris systems, 1-7
performing an upgrade, 1-13
software requirements, 1-4
verifying completeness, 1-12
installation requirements, 1-4
Internal Network Loopback, 6-10
IP conservative, managing DSLAM chassis, 2-16
IP injection table, 4-7
K
kernel parameters, for HP-UX, 1-5
L
lamp test, performing, 5-14
LAN Adapter, connecting devices, A-1
LAN router, connecting devices, A-6
Line Loopback, 6-4
loopback modes
checking community name, 6-13
up and down codes, 6-9
using to troubleshoot, 6-4
M
Management Information Base Files, 1-13
management link
diagnosing problems, 6-3
losing connection, 6-3
MCC cards
obtaining identity of, 5-10
obtaining status, 5-14
resetting, 3-4
setting community names, 4-2
menus, accessing components, 2-6
MIB files, browsing, 1-13
monitoring operations, types of, 1-2
N
NAM cards
obtaining identity of, 5-10
obtaining status, 5-14
NetView, 1-4
accessing DCE Manager, 2-3
opening a Device Display, 2-4
network configuration, A-1
network requirements, 1-5
networks, checking performance, 6-1
O
OpenView, 1-4
accessing DCE Manager, 1-15, 2-3
accessing DCE Manager submenus, 2-6
Configuration menu, 2-6
discovering devices, 2-1
Fault menu, 2-6
obtaining device identity, 5-9
opening a Device Display, 2-4
requirements, 1-6
using the event log, 5-4
operating systems, supported platforms, 1-4
operational status
obtaining through color, 5-3
polling for, 3-2