User`s guide

SNMP Management Connectivity
A-6
7800-A2-GB26-80May 1999
Connecting Devices Through a Router
Figure A-2 shows an AAC device connected to a LAN router. The device
configurations that enable this type of connectivity are given in
AAC Device
Configuration .
Network
LAN
RouterEthernet
Management
Systems
HP Openview
(XXX.020.040.021)
496-15158
XXX.20.41.143
(AAC)
Figure A-2. Connecting an AAC Device Using a LAN Router
AAC Device Configuration
The following device settings configure an AAC device for operation as shown in
Figure A-2. Refer to the
ACCULINK Access Controller Reference Guide for a
description of how to configure the device using the device’s terminal interface.
CPU Card: TCP/IP Options Value
DEFAULT IP PORT local
DEFAULT IP SLOT n/a
DEFAULT IP UNIT n/a
HOST IP ADDR XXX.20.41.143
HOST NETMASK 255.255.255.0
RPT1 IP ADDR XXX.020.040.021
RPT1 COMMUN STR public
RPT2 IP ADDR 0.0.0.0
RPT2 COMMUN STR
RPT1 IP ADDR 0.0.0.0
RPT1 COMMUN STR
To export alarms to the SNMP management system, set the alarms to Report on
the Main Menu → Alarms → Filter screen of the terminal interface configuration
utility.