Instruction manual

10 SNE2-A2-ZN12-30
100 Mbps
Ethernet Link
(100)
Solid Green 100 Mbps
Ethernet
connection is
established
If the Ethernet 100 LED is
illuminated, the Ethernet Lnk LED
will also be illuminated.
No Illumination No 100 Mbps
Ethernet
connection
If the Ethernet 100 LED remains
unlit but the Ethernet Lnk LED is
illuminated then a connection has
been established at 10 Mbps rather
than 100 Mbps.
10/100 Ethernet
Activity (Act)
Pulsing Amber* Standard
operation
Traffic is flowing without any
problems
Solid Amber Heavy traffic
No Illumination No activity Either there is no Ethernet link or a
link exists but there is no activity.
10/100 Ethernet
Link (Lnk)
Solid Green Ethernet
connection is
established
If the Ethernet Lnk LED is
illuminated but not the Ethernet
100 LED then a 10 Mbps
connection has been established. If
the Ethernet 100 and Lnk LEDs are
BOTH illuminated then a 100
Mbps connection has been
established.
No Illumination No Ethernet
connection
The Ethernet 100 and Act LEDs
will remain unlit by default.
* A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a
more rapid, less constant rate.
Table 4: SNE2040G LEDs (Sheet 2 of 2)
LED STATE INDICATION ADDITIONAL INFORMATION