User guide

BSX8-A2-GZ40-00 September 2004 5
MIM-4000F
The MIM-4000F is a four-port fiber gigabit Ethernet interface connecting directly to
the gigabit Ethernet switch in the BSX8000-5 uplink module.
MIM-2E1 or MIM-4E1
Plug your E1 cable into one of the RJ45 E1 ports on the MIM-2E1 or MIM-4E1
faceplate. The MIM-2E1 or MIM-4E1 connects to an E1 network extender provider
unit (ENE2000-P, ENE2000-P-12 or, for loop bonding, ENE2020-P) via a standard
E1 line.
Verify the connection: the Lnk (link) LED on the MIM-2E1 or MIM-4E1 faceplate
flashes green to indicate a network connection has been established.
MIM-2T1
Plug your T1 cable into one of the RJ45 T1 ports on the MIM-2T1 faceplate. The
MIM-2T1 connects to a T1 network extender provider unit (TNE1500 or TNE1520)
via a standard T1 line.
Verify the connection: the Lnk (link) LED on the MIM-2T1 faceplate flashes green
to indicate a network connection has been established.
BAC Management
The BSX8000-5 uplink module provides BAC management capability via the
Command Line Interface (CLI), Simple Network Management Protocol (SNMP),
and the web-based Network Management System (NMS). For access and
configuration instructions, refer to the CLI Management User Guide and the NMS
Management User Guide.