User`s manual

Logging into the BitStorm L3S Series Device Manager
Console Version
You log into the BitStorm L3S-T's console program from a workstation, terminal or modem connected to the
console port on the front panel of the Switch. Your management console must be running a VT100 emulation,
such as Windows HyperTerminal. See Setting Up a Management Console.
From the keyboard on your management console, press Enter. The BitStorm L3S Series Device Manager
Console Login Password menu appears. If it does not, check the RS232 settings on your console.
1.
Enter your password. A system password was created during installation. If you did not install the Switch,
ask the installer for the password.
2.
95