User`s manual

Example: >set port negotiation 7 disable
When auto-negotiation is enabled on a port, the Switch decides the port speed and duplex mode when
that port establishes a link to another connection. Auto-negotiation must be enabled on both ends of the
link.
To set duplex mode:
>set port duplex <port_number> [full | half]
Example: >set port duplex 12 full
When auto-negotiation is disabled, select half or full to set the duplex mode. full is automatically set if
auto-negotiation is enabled. Full duplex transmissions effectively double your bandwidth by transmitting
and receiving packets at the same time. Both ends of a link must be set to full duplex to have full duplex
operation.
4.
To set flow control:
>set port flowcontrol <port_number> [on | off]
Example: >set port flowcontrol 4 off
Flow control minimizes dropped packets by sending out collision signals when the port's receiving buffer is
full. The default is on.
5.
To name a port:
>set port name <port_number> [port_name]
Example: >set port name 7 sales
You can give a text name of up to 12 alphanumeric characters to a single port.
6.
Other port commands
For a complete listing of all show commands, see Command List.●
To see and clear port statistics, see Port Statistics.●
69