User`s manual

traces the route that an IP datagram follows from one host to another. It is helpful in debugging

routes from the switch to a specified destination. Replies and information for each hop are

displayed on the screen. Enter Control-C to stop the program.

<ip_address> the IP address of the destination host

[v] verbose setting displays additional information along with replies from the hosts

<maxHop> limits the number of hops or hosts tried during the probe. A number from 0-255.

Example: >traceroute 192.23.3.16 v 4

>vlan byprotocol [enable | disable]

sets the switch to automatically create or stop creating dynamic VLANs by protocol type. The

default setting is disable.

Example: >vlan byprotocol enable