User`s manual

shows the setting of the acceptable frame type parameter for the specified port
Example: >show port acceptable-types 3
>show port gvrp-status <port_number>
shows whether GVRP is enabled on the specified port
Example: >show port gvrp-status 3
>show port ingress-filtering <port_number>
shows the setting of the ingress filtering parameter for the specified port
Example: >show port ingress-filtering 3
>show port pvid <port_number>
shows the port's VID
Example: >show port pvid 3
>show port name <port_number> displays text name for all ports or one port
Example: >show port name
Example: >show port name 8
>show port statistics <port_number> displays traffic statistics for a specific port
Example: >show port statistics 4
>show port status <port_number> displays the configuration for a specific port
Example: >show port status 2
>show port tagging <port_number> shows the state of the tagging parameter for the specified port
Example: >show port tagging 3
>show processes displays CPU process, status and state information
Example: >show processes
>show qos defaultpriority <port_list> displays the default priority (0-7) for the given list of ports
Example: >show qos defaultpriority 1-4
>show qos egressqueuesize <port_list> <class_list>
shows the outgoing data queue sizes, in percent, for the specified ports
Example: >set qos egressqueuesize 1-2 0-3 shows queue sizes for all classes for ports 1
through 2:
Port 1, Priority 0 is using 100%
Port 1, Priority 1 is using 100%
Port 1, Priority 2 is using 100%
Port 1, Priority 3 is using 100%
Port 2, Priority 0 is using 90%
Port 2, Priority 1 is using 90%
Port 2, Priority 2 is using 90%
Port 2, Priority 3 is using 90%
>show qos ingressqueuesize <port_list> <class_list>
Gigabit ports only: shows the incoming data queue sizes, in percent, for the specified list of
Gigabit ports
Example: >show qos ingressqueuesize 1-4 0-3
shows queue sizes for all classes for ports 1 through 4:
Port 1, Priority 0 is using 100%
Port 1, Priority 1 is using 100%
Port 1, Priority 2 is using 100%
Port 1, Priority 3 is using 100%
Port 2, Priority 0 is using 90%
Port 2, Priority 1 is using 90%
Port 2, Priority 2 is using 90%
Port 2, Priority 3 is using 90%
62