User`s manual

Using Telnet
You can access the Console version of the BitStorm L3S Series Device Manager and manage the Switch using
a Telnet device.
Important:
The Switch supports a maximum of three simultaneous Telnet sessions.
●
A session times out after 15 minutes of inactivity.●
Making a Telnet connection:
Make sure you have set the IP address, subnet mask and default gateway directly at the console port as
described in the Switch's Quick Start Installation Guide.
1.
Make the Telnet connection at the Telnet device.2.
If a system password was created, the password screen appears on your Telnet screen.3.
Enter the system password. The Main Menu of the Console version of the BitStorm L3S Series Device
Manager appears.
4.
You can now proceed to manage the Switch. See Managing the Switch with BitStorm L3S Series Device
Manager - Console version for complete details.
5.
37