User`s manual

Selecting a Proper Location
The Switch can be located in a wiring closet or equipment room, either mounted in a standard 19-inch equipment
rack or left free-standing.
In selecting a location, make sure that:
you follow the proper cabling guidelines●
the Switch is accessible and cables can be connected easily●
cables are away from sources of electrical noise such as radios, transmitters, broadband amplifiers, power
lines and fluorescent lighting fixtures
●
water or moisture cannot enter the case of the unit●
airflow around the unit and through the vents on the side of the case is not restricted. A minimum of 25mm
or 1 inch clearance on all sides is recommended.
●
no objects are placed on top of the unit.●
22