User`s manual

BitStorm L3S-T Technical Specifications
Management
Spanning Tree
●
DHCP client●
RMONv1 - Groups 1,2,3,9●
SNMPv1 including MIBII, Etherlike MIB, Bridge MIB and an enterprise MIB to control VLANs and Routing●
Password security●
Field upgradable firmware with TFTP●
Supports HTTP, HTML and Java●
Options
- Command Line interface
- Netscape or Internet Explorer
- VT100 emulation through RS232C console port
- SNMP-compatible software such as HP OpenView
- TELNET
●
Routing
IP routing of more than 6.5 million pps
●
Direct routes are held in hardware for true wire-speed IP routing performance●
Dynamic routing using RIP1, RIP2 or OSPF●
Each port can be configured as a routing interface and managed separately●
Supports CIDR and IP multinetting●
VLANs
Up to 1,024 user-defined VLANs by protocol type, MAC address and switch port
●
VLANs automatically created for network protocols using special snooping●
Configure and manage VLANs manually●
Supports routing between all IP VLANs●
802.1Q VLANs including dynamic VLAN membership propagation through GVRP●
Options
Gigabit Ports (up to 2) KS-MG1 Gigabit Ethernet Module with one 1000Base-SX port with
SC connector
WAN Interface (up to 2) NW-WAN Module for T-1/E1, Multilink PPP or Frame Relay
(scheduled for later release)
Slaves
BitStorm L3S-X, 24 10/100Base-TX ports with UTP RJ-45
connectors
Modelname8f, 8 10/100Base-FX ports with MT-RJ connectors
Redundant Power
NW-RPS Redundant Power Supply for up to four switches
Physical Specifications
Ports
48 10/100Base-TX with UTP RJ-45 connectors.
Front Panel Indicators
Link/Activity, 100Mbps
Dimensions
17.6” (44.5cm) x 5.25” (13cm) x 14.4” (36.6cm)
Rack Mount
Rack mount kit included
Console Port
RS232C with DB-9 connector
Switching Specifications
Architecture
64Gbps crosspoint switching fabric
152