User`s manual

can save a dynamically learned station by simply changing its attribute from dynamic to permanent.
The IP address and subnet mask of all stations currently receiving traps are listed. To add other stations
to the list, fill in the IP Address and IP Mask fields with the correct information.
1.
Toggle through the Attribute field. Your choices are permanent or dynamic. Permanent means the
specified IP address is permanently saved in the Switch's memory until you change it. Dynamic means
that the IP address can be erased when the Switch receives an SNMP packet and learns a new IP
address. Dynamic entries are also erased when the Switch is rebooted.
2.
Enter the community name of the network management system. This name must be one of the same
community names entered in Set Device Community in the Console or Command Line versions of
BitStorm L3S Series Device Manager. Important: Before an SNMP management system can retrieve
data from the Switch, it must supply at least one of the community names entered.
3.
136