User`s manual

To add a routing interface, select Add to display the screen shown below.1.
Select either Create a new VLAN or Use an
existing VLAN.
2.
If you selected Create a new VLAN, enter the
VLAN name on the next screen. Select the
ports to be included in the VLAN and enter the
IP address and IP subnet mask for this
interface.
3.
If you selected Use an existing VLAN, enter
the VLAN's VID and the IP address and IP
subnet mask for this interface on the next
screen.
4.
Click OK to return to the Router Interfaces
screen.
5.
Use Refresh to update the screen after creating
a new router interface.
6.
To configure RIP or OSPF on this interface, select the interface from the list and press the correct button.
For details on configuring these protocols, see Configuring RIP and Configuring OSPF.
7.
124