User`s manual

Identifying the Switch on your Network
Web version
The System Configuration screen shows the information you need to identify this Switch on your network, its
hardware and software version numbers and the amount of time it has been running.
To help you identify this Switch further, you can also enter the Switch's:
name
●
physical location, such as "Second Flr SW closet".●
a person to contact in the event of problems.●
Select Configuration from the Main Menu, then System to display this screen.
The following parameters are ready-only:
IP address, subnet mask and default gateway: These were entered during installation and cannot be
changed on this screen.
●
MAC Address: The MAC address (hardware address) assigned to the Switch. The MAC address cannot
be changed.
●
Up Time: The time that has elapsed since the Switch was turned on or reset.●
Description: A general description of the device.●
S/W Version: The version of the software currently loaded in flash memory.●
Boot ROM Version: The version of the Boot ROM currently installed in the Switch.●
Enter any Name, Location or Contact information in the three remaining fields to help you identify this
switch.
1.
After entering this information, click Apply to save the new settings into the Switch’s memory.2.
118