User`s manual

Restarting and Resetting the Switch
Console version
To restart or reset the Switch:
Use Warm Start to put any changes you made into effect. If none were made, it keeps the
current settings.
●
Use Shutdown when you have to unplug the Switch.●
If you wish to erase all configuration settings, use Reset Factory Defaults found under
System Setup on the Console Main Menu.
●
Select Shutdown/Warm Start from the Console Main Menu. This screen appears.
Make your selection and press Enter.
Important: When you change the configuration, always allow a few seconds for the Switch to process the
change. If you turn the Switch off immediately, you could lose the new settings.
113