User`s manual

Configuring VLANs by Port
Console version
You can create port-based VLANs to:
contain traffic at Layer 2 by creating separate physical segments
●
set one or more ports as routing interfaces●
When you configure routing, traffic can be routed between Layer 2 VLANs on this Switch as well as to other
network routers.
Configuration steps
Create or modify port-based VLANs by selecting VLAN Configuration from the Console Main Menu.
This menu appears:
The Switch's default VLAN, Default PVID and any VLANs that have already been configured appear with
their VLAN Identifiers (VID) and the port numbers assigned to them. VID 0 is reserved for the Switch's
internal operations. VID 1 is the default VLAN used by the Switch.
1.
To create a VLAN, enter a Name in New VLAN Entry. Press Enter.2.
Enter one or more ports that are members of this VLAN.3.
If you wish to assign your own VID, enter your own VID in the New VID field.4.
If you will be setting up IP routing on this Switch, make a record of these VLANs and their VIDs. See
Configuring IP Routing.
5.
To delete a VLAN, simply delete the port numbers assigned to it. When you save at the end of this
session, the VLAN is erased.
6.
Save your entries and Exit.7.
109