Specifications

14 January 2006 AIM2-A2-GZ41-00
ADSL Parameters
No configuration is necessary for the AIM29000 to operate at the default settings.
AIM29000 Management
All parameters on the AIM29000 are software selectable. Dependent upon the
management module installed in your BLC, the AIM29000 can be configured via
the Command Line Interface (CLI), Simple Network Management Protocol
(SNMP), or the web-based Network Management System (NMS). The NMS is
recommended, since it is the most capable and easiest to use.
Management Via The NMS
The NMS is an embedded web server that resides within the firmware of BLC
management modules. This web server maintains statistical and configurational
data for the AIM29000.
NOTE: If your BLC is newly installed and has not yet been initialized, you must
configure the IP Address, Subnet Mask and Gateway before you will be able to
access data or complete any other configurations. Refer to the NMS Management
User’s Guide at www.paradyne.com for instructions.
Table 3. AIM29000 Defaults
Parameter Default
Backbone-VLAN 0
Downstream Speed n/a (Adaptive Port Mode)
Flood Uplink
Frame Type 1483LLC
IP Range 1 0.0.0.0 – 255.255.255.255
IP Range 2-4 0.0.0.0 – 0.0.0.0
Port Mode Adaptive
Protocol All
Standard Mode Multimode
Upstream Speed n/a (Adaptive Port Mode)
Virtual Channel Identifier (VCI) 35
Virtual Path Identifier (VPI) 0
VLAN 0 – 0
VLAN Priority 0
VPI/VCI Detect On