User`s guide

8900-A2-GB20-50 August 2005 2-1
2
Accessing the SCP Card Web Interface
Introduction
The ATM line cards can be configured and monitored using:
 The SCP card’s Command Line Interface (see the 8620 and 8820 Broadband
Loop Carrier Command Line Interface Reference) or TL1 interface (see the
8620 and 8820 Broadband Loop Carrier TL1 Interface Reference)
 GrandVIEW EMS 4.1 or above (see the GrandVIEW EMS User’s Guide)
 SNMP using another EMS (see the 8620 and 8820 Broadband Loop Carrier
SNMP Reference)
 The web interface of the Shelf Concentration and Processing (SCP) card.
Logging Into the Web Interface
To access the web interface:
Procedure
1. Open your web browser. (Internet Explorer Version 6 or above is
recommended.)
2. Type http:// and the IP address of the SCP card into the Address field of your
browser window. For example:
The default address is 10.10.10.10.
3. A login window appears. Enter the User ID and Password, and click on OK.
The web interface screen appears. The web interface screens consist of a
header, a menu frame, and a content frame.