Specifications

6381-A4 Router Users Guide 95
Source Port
The source protocol port. You cannot configure this field without entering the
protocol first.
Destination Port
The destination protocol port or port range. You cannot configure this field
without entering the protocol first.
Source MAC
The MAC address of the traffic source.
Local Routing Mark The Local Routing Mark field is enabled only when Locally Generated is
selected in the Ingress Interface field. The mark for DNS traffic generated by
different applications are described below:
• Dynamic DNS: 0xE1
• Dynamic Proxy: 0xE2
• Web Server: 0xE3
• MSNTP: 0xE4
• DHCP Server: 0xE5
• IPtables Utility: 0xE6
• PPP Daemon: 0xE7
• IP Route: 0xE8
• ATM Library: 0xE9
• NET Tools: 0xEA
• RIP: 0xEB
• RIP v2: 0xEC
• UPNP: 0xEE
• Busybox Utility: 0xEF
• Configuration Manager: 0xF0
• DropBear Utility: 0xF1
• Voice: 0
Policy routing if selected, uses the egress interface. The ingress interface is not applicable if
policy routing is used.
Currently routing algorithms make decision based on destination address, i.e., only Destination IP
address and subnet mask is supported. The Policy Routing page enables you to route packets on
the basis of various fields in the packet. The following fields can be configured for Policy Routing:
• Destination IP address/mask
• Source IP address/mask
• Source MAC address
• Protocol (TCP, UDP, ICMP, etc)
• Source port
• Destination port
• Incoming interface
• DSCP