Specifications

6381-A4 Router Users Guide 88
To define a static route between networks:
6. From the navigation bar at the top of the screen click Advanced
7. From the left hand navigation pane select Static Routing.
8. From the Choose a connection dropdown select the connection which to add the static
route.
9. In the New Destination IP, Gateway, Mask, and Metric text boxes, enter the appropriate
information.
To match the example above:
• New Destination IP: 10.0.0.0 (the network IP address of the subnet)
• Mask: 255.255.255.0 (the subnet mask)
• Gateway: 192.168.1.5 (the LAN-side IP address of the second router, through which
the stations in the subnet access the network)
• Metric: 0
You are telling the RG that a new subnet with an IP of 10.0.0.0 and a netmask of
255.255.255.0 has been added and can access the RG via station 192.168.1.5. The metric
is 0 since the subnet is one level down on the LAN.
10. You can add up to 16 entries.
11. Click Apply
The Apply button will temporarily save this connection. To make the change permanent,
click Tools (at the top of the page) and select System Commands. On the System
Commands page, click Save All.