Specifications

6381-A4 Router Users Guide 73
Select LAN
Connection
Select the LAN connection to which the client is to be added.
Enter IP Address
Assign the dynamic IP address to the host here. This is a mandatory field.
Hostname
Hostname of the client. This is an optional field.
MAC Address
MAC address of the host. This is an optional field.
To configure a LAN client:
1. From the navigation bar at the top of the screen click Advanced
2. From the left hand navigation pane select LAN Clients.
If DHCP is used, all DHCP clients are automatically assigned.
If a fixed IP address server is on the LAN and you want this server to be visible via the WAN,
you must add its IP address. Once the IP address has been added, you can apply Port
Forwarding and Access Control rules to this IP address.
3. Click Apply
The Apply button will temporarily save this connection. To make the change permanent,
click Tools (at the top of the page) and select System Commands. On the System
Commands page, click Save All.
To convert a dynamic entry into a static entry:
1. From the navigation bar at the top of the screen click Advanced
2. From the left hand navigation pane select LAN Clients.