Specifications

6381-A4 Router Users Guide 38
8. Select the Quality of Service (QOS).
Leave the default value if your ISP did not provide this information. Depending on the QoS
you select, you may also enter:
• PCR (Peak Cell Rate)
• SCR (Sustainable Cell Rate)
• MBS (Maximum Burst Size)
• CDVT (Cell Delay Variation Tolerance)
9. To complete the connection you must now click the Apply button.
The Apply button will temporarily save this connection. To make the change permanent,
click Tools (at the top of the page) and select System Commands. On the System
Commands page, click Save All.