Specifications

6381-A4 Router Users Guide 100
You are configuring QoS on this interface only. Any WAN/LAN interface that is not
configured has the default Untrusted mode.
2. Select CoS1 in Class of Service.
All incoming traffic from the Ethernet interface receives CoS1, the highest priority.
3. Click Apply to temporarily activate the settings.
The changes take effect when you click Apply; however, if the RG configuration is not saved,
these changes will be lost upon RG reboot.
4. To make the change permanent, click Tools and select System Commands. On the
System Commands page, click Save All.
Ingress Payload Database Configuration
The Policy Database Configuration page enables you to configure QoS payload database and
policy routing.
QoS can be configured in the Ingress and Egress pages on a per interface basis. The Policy
Database page enables you to classify packets on the basis of various fields in the packet.
The following fields can be configured for QoS:
• CoS
• Source IP address/mask
• Destination IP address/mask
• Protocol
• Source port start
• Source port end
• Destination port start
• Destination port end
• Source Mac address