Specifications

12 6350-A2-ZN12-30
Increasing the Number of End-User
Systems
A single end-user system is attached to the Hotwire 6350 ReachDSL Modem by using an
Ethernet crossover cable. To increase the number of end-user systems, connect all the PCs to an
Ethernet hub using a straight-through cable.
The Hotwire ReachDSL port card supports 32 hosts/subnets per DSL port and the Hotwire
ReachDSL Modem supports up to 256 MAC entries.
Cables and Connectors
Standard twisted-pair CAT3 or better cables are recommended.
z The LINE and PHONE interface connectors
use 6-pin, non-keyed modular plugs. RJ11 or RJ14
6-pin connectors can be used.
Line & Phone Connectors
z The LINE and PHONE jack pinouts are either filtered or unfiltered for POTS.
Pin # Function
1 Not used
2 Ring 2 (optional)
3 DSL Ring 1
4 DSL Tip 1
5 Tip 2 (optional)
6 Not used
PHONE Jack Pinouts LINE Jack Pinouts
Pin # 3, 4 Filtered for POTS Pin # 3, 4 DSL and POTS
Pin # 2, 5 2nd POTS unfiltered Pin # 2, 5 2nd line pass-through
98-15304a
6-Pin
RJ11 Plugs
Pin #1
Pin #6