Specifications

ManualsBrandsZhone ManualsComputer equipment6350-A4

6350-A2-ZN12-30 1

Hotwire

ReachDSL

Modem

Model 6350-A4

Installation Instructions

Document Number 6350-A2-ZN12-30

December 2005

Contents

End User License Agreement (Zhone and Affiliates) ............................................................... 2

Trademarks ................................................................................................................................3

Package Checklist ..................................................................................................................... 4

Wiring and Cables You May Need (not supplied) .................................................................... 4

Installing Additional Phone Filters ........................................................................................... 5

Installing the Hotwire 6350 ReachDSL Modem ....................................................................... 6

Optional ReachDSL Modem Wall Placement ........................................................................... 8

Status LEDs ............................................................................................................................... 10

Troubleshooting ......................................................................................................................... 11

Increasing the Number of End-User Systems ........................................................................... 12

Cables and Connectors .............................................................................................................. 12

Technical Specifications for Hotwire 6350 ReachDSL Modem ............................................... 14

Important Safety Instructions .................................................................................................... 15

Compliance ............................................................................................................................... 16

Government Requirements ........................................................................................................ 18

Contacting Global Service and Support .................................................................................... 20

Technical Support ...................................................................................................................... 20

Service Requirements ................................................................................................................ 20

Summary of content (20 pages)

PAGE 1
Hotwire® ReachDSL® Modem Model 6350-A4 Installation Instructions Document Number 6350-A2-ZN12-30 December 2005 Contents End User License Agreement (Zhone and Affiliates) ............................................................... Trademarks ................................................................................................................................ Package Checklist .....................................................................................................................
PAGE 2
End User License Agreement (Zhone and Affiliates) Do not install this Software unless you agree to these provisions. Return the Software promptly for a refund if you do not agree. License. Zhone Technologies, Inc. and/or an affiliate ("Zhone") hereby grants you ("User")—either an individual or a single business entity—the non-exclusive right to install, access, run, or inter.
PAGE 3
DISCLAIM ALL WARRANTIES OF FITNESS FOR PARTICULAR PURPOSE, MERCHANTABILITY AND NON-INFRINGEMENT. Some states or other jurisdictions do not allow the exclusion of implied warranties on limitations on how long an implied warranty lasts, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from one state or jurisdiction to another. Limit of Liability.
PAGE 4
Package Checklist Verify that your package contains the following: Rea chD SL PWR ALM TST LINE TX/R X ETH ERN ET Hotwire 6350 ReachDSL® Modem Power cord with power transformer DSL interface cable with RJ11 connectors Wiring and Cables You May Need (not supplied) The following standard cables and connectors can be used with this product: Standard RJ11 (or RJ14) wall jack for the DSL cabling 4 Ethernet 8-pin straight-through or cross-over cable 6350-A2-ZN12-30
PAGE 5
Installing Additional Phone Filters IC E LR P L. AC T.E CE . EQ E1 SS 00 UIPMAR 29 Y 6 EN T 92 99 7 R PROD M ad e geprufte Sicherheit UCT SERV TUY in TM /N 08 P ho ne Ch in 02 a -3 Be / Fa 39 l Fu br 2se iquè 00 In Ch c. 11 ina 98 Fi lte r LI E N A phone filter is recommended to minimize background noise during a phone conversation on telephones not connected directly to the Hotwire 6350 ReachDSL Modem.
PAGE 6
Installing the Hotwire 6350 ReachDSL Modem Place the Hotwire 6350 ReachDSL Modem on a flat surface with clearance for the rear connectors. Procedure 1 UNPLUG TELEPHONE. If a telephone is connected at the RJ11 Wall Jack RJ11 wall jack where the ReachDSL modem will be installed, unplug the telephone line from the wall jack. 2 CONNECT A TELEPHONE. (Optional – go to Step 3 if you are not connecting a telephone to the modem.
PAGE 7
4 CONNECT TO PC OR ETHERNET HUB. Use an 8-pin Ethernet cable (crossover or straight-through) for the Ethernet connection. Insert one end of the cable into the jack labeled ETHERNET. Connect to one of the following: — PC. Use an Ethernet crossover cable and connect the other end to a PC with an Ethernet Network Interface Card (NIC) installed. ETHERNET POWER ETHERN ET – or – PC with Ethernet Network Interface Card Ethernet Crossover Cable — ETHERNET Ethernet Hub.
PAGE 8
Optional ReachDSL Modem Wall Placement The Hotwire 6350 ReachDSL Modem is designed for tabletop placement. The modem can also be mounted on a wall. To mount the modem, you will need: q Two slotted-head #6 self-threading screws with plastic anchors q Drill and 3/16" drill bit for the plastic anchors q Screwdriver A template with the dimensions for the two screws is provided. See ReachDSL Modem Hardware Template on page 9.
PAGE 9
Bottom 5.
PAGE 10
Status LEDs When power is applied, the ReachDSL modem performs self-diagnostics and the PWR LED is on. The self-diagnostics include a power-on self-test during which all of the LEDs turn on for one second. Power – green Alarm – red Test – yellow DSL Line – green Transmit/Receive – green Ethernet Link – green PWR ALM TST LINE TX/RX ETHERNET ReachDSL 01-17003 All of the LEDs turn on and off during the power-on self-test.
PAGE 11
Troubleshooting LED Symptom Action All LEDs are on. If LEDs remain on after ten minutes, the modem is not functional. Contact the service provider. ALM LED remains on. The power-on self-test may have failed. Unplug the unit and reapply power. If the alarm LED is still on, contact the service provider. ALM and TST LEDs are blinking. Firmware download may be in progress. If firmware download is not in progress or the LEDs continue blinking after ten minutes, contact the service provider.
PAGE 12
Increasing the Number of End-User Systems A single end-user system is attached to the Hotwire 6350 ReachDSL Modem by using an Ethernet crossover cable. To increase the number of end-user systems, connect all the PCs to an Ethernet hub using a straight-through cable. The Hotwire ReachDSL port card supports 32 hosts/subnets per DSL port and the Hotwire ReachDSL Modem supports up to 256 MAC entries. Cables and Connectors Standard twisted-pair CAT3 or better cables are recommended.
PAGE 13
z The Ethernet interface connector uses an 8-pin, non-keyed modular plug. — To connect the DSL modem to an Ethernet hub, use the straight-through connection. Ethernet Cable 8-Pin Straight-through Connection Pin # Function 1 10BaseT TX D+ 2 10BaseT TX D– 3 10BaseT RX D+ 4&5 Not used 6 10BaseT RX D– 7&8 Not used 8-Pin Plug Pin #8 Pin #1 98-16055a –or– — To connect the DSL modem directly to a PC with an Ethernet NIC card, use an Ethernet crossover cable.
PAGE 14
Technical Specifications for Hotwire 6350 ReachDSL Modem Item Specification* Height x Width x Depth 3.71 cm x 14.54 cm x 11.00 cm (1.46" x 5.72" x 4.33") Weight 0.20 kg (0.45 lb.) Power Class 2 Transformer normal service input voltage range Input: 100 VAC (+10%), 50 Hz; 120 VAC (+10%), 60 Hz; or 230 VAC (+10%), 50/60 Hz Output: 5 VDC nominal, minimum 0.
PAGE 15
! Important Safety Instructions 1 Read and follow all warning notices and instructions marked on the product or included in the manual. 2 Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered. 3 Do not allow anything to rest on the power cord and do not locate the product where persons will walk on the power cord.
PAGE 16
Compliance CE Marking When the product is marked with the CE mark on the equipment label, this demonstrates full compliance with the following European Directives: z Directive 73/23/EEC – Council Directive of 19 February 1973 on the harmonization of the laws of the member states relating to electrical equipment designed for use within states relating to electrical equipment designed for use within certain voltage limits, as amended by Directive 93/68/EEC.
PAGE 17
Declaration of Conformity This Declaration of Conformity is made by Paradyne Corporation pursuant to Parts 2 and 15 of the Federal Communications Commission’s Rules. This compliance information statement pertains to the following products: Trade Name:Hotwire Model Number:6350-A4-200 This device complies with Part 15 of the FCC Rules.
PAGE 18
Paradyne Corporation, located at the above address, hereby certifies that the Hotwire® ReachDSL® Model Number 6350-A4-200, bearing labeling identification number US:AW2DL03B6350-A4 complies with: the Federal Communications Commission’s (“FCC”) Rules and Regulations 47 CFR Part 68, the Administrative Council on Terminal Attachments (“ACTA”)-adopted technical criteria TIA/EIA/IS-968, “Telecommunications – Telephone Terminal Equipment – Technical Requirements for Connection of Terminal Equipment To the Telepho
PAGE 19
company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service. 6 If you experience trouble with this equipment, please contact your sales or service representative (as appropriate) for repair or warranty information. If the product needs to be returned to the company service center for repair, contact them directly for return instructions using one of the methods listed under Technical Support on page 20.
PAGE 20
Contacting Global Service and Support Contact Global Service and Support (GSS) if you have any questions about this or other Zhone products. Before contacting GSS, make sure you have the following information: z Zhone product you are using z System configuration z Software version running on the system z Description of the issue Technical Support If you require assistance with the installation or operation of your product, or if you want to return a product for repair under warranty, contact GSS.