Specifications
Table Of Contents
- Contents
- End User License Agreement (Zhone and Affiliates)
- Hotwire 6310 ReachDSL v1 (MVL) Modem Overview
- Getting Started
- Installing the Hotwire 6310 ReachDSL v1 Modem
- Power-On
- Troubleshooting
- HomeLink (for ReachDSL v1 Modems Only)
- Increasing the Number of End-User Systems
- Cables & Connectors
- Optional ReachDSL Modem Wall Placement
- Technical Specifications for Hotwire 6310 ReachDSL v1 Modem
- Important Safety Instructions
- Government Requirements
- Trademarks
- Patent Notification
- Contacting Global Service and Support
- Technical Support
- Service Requirements
8 6310-A4 ReachDSL Modem 6310-A2-ZN12-10
4 Use an 8-pin Ethernet cable for the Ethernet connection. Insert one end of the cable into the
jack labeled ETHERNET.
— Use a straight-through cable and connect the other end to an Ethernet hub.
(To connect to a hub’s Uplink connection, use an Ethernet crossover cable).
–or–
— Use an Ethernet crossover cable and connect the other end to a PC with an Ethernet
Network Interface Card (NIC) installed.
PHONE LINE
ETHERNET
POWER
01-17008
Ethernet
Line
Ethernet
Hub
8
7
6
5
4
3
2
1
Ethernet
Straight-Through
Cable
01-17009
Ethernet
Line
PC with Ethernet
Network Interface
Card
Ethernet
Crossover
Cable
PHONE LINE
ETHERNET
POWER