Specifications
Table Of Contents
- Contents
- End User License Agreement (Zhone and Affiliates)
- Hotwire 6310 ReachDSL v1 (MVL) Modem Overview
- Getting Started
- Installing the Hotwire 6310 ReachDSL v1 Modem
- Power-On
- Troubleshooting
- HomeLink (for ReachDSL v1 Modems Only)
- Increasing the Number of End-User Systems
- Cables & Connectors
- Optional ReachDSL Modem Wall Placement
- Technical Specifications for Hotwire 6310 ReachDSL v1 Modem
- Important Safety Instructions
- Government Requirements
- Trademarks
- Patent Notification
- Contacting Global Service and Support
- Technical Support
- Service Requirements
6 6310-A4 ReachDSL Modem 6310-A2-ZN12-10
Getting Started
Before beginning your modem’s installation, make sure that you have all the equipment that you
need.
Package Checklist
Verify that your package contains the following:
z Hotwire 6310 ReachDSL v1 Modem
z DSL interface cable with RJ11 connectors
z Power cord with power transformer
Wiring and Cables You Need
The following wiring and standard connectors are used with this product:
z Standard RJ11 (or RJ14) wall jack for the ReachDSL modem cabling.
z Standard Ethernet 8-pin, non-keyed modular plug for a PC or workstation. An Ethernet
straight-through or crossover cable is used.
—Refer to Installing the Hotwire 6310 ReachDSL v1 Modem on page 7 for Ethernet
installation details.
—Refer to Cables & Connectors on page 13 for ReachDSL modem and Ethernet cable
pin assignments.