Specifications
Table Of Contents
- Contents
- End User License Agreement (Zhone and Affiliates)
- Hotwire 6310 ReachDSL v1 (MVL) Modem Overview
- Getting Started
- Installing the Hotwire 6310 ReachDSL v1 Modem
- Power-On
- Troubleshooting
- HomeLink (for ReachDSL v1 Modems Only)
- Increasing the Number of End-User Systems
- Cables & Connectors
- Optional ReachDSL Modem Wall Placement
- Technical Specifications for Hotwire 6310 ReachDSL v1 Modem
- Important Safety Instructions
- Government Requirements
- Trademarks
- Patent Notification
- Contacting Global Service and Support
- Technical Support
- Service Requirements
6310-A2-ZN12-10 6310-A4 ReachDSL Modem 15
Optional ReachDSL Modem Wall
Placement
The Hotwire 6310 ReachDSL v1 Modem is designed for tabletop placement. The ReachDSL
modem can also be mounted on a wall. To mount the modem, you will need:
q Two slotted-head #6 self-threading screws with plastic anchors
q Drill and 3/16" drill bit for the plastic anchors
q Screwdriver
A template with the dimensions for the two screws is provided. See ReachDSL Modem Hardware
Template on page 16.
Procedure
To mount the Hotwire 6310 ReachDSL v1 Modem:
1 Use a drill to install the plastic anchors.
2 Use a screwdriver to install the screws. Do not install the screws flush with the wall. Leave
enough clearance to hang the modem housing from the screws.
Wall
Fasteners
01-17004
Hotwire
ReachDSL
Modem