Specifications
Table Of Contents
- Contents
- End User License Agreement (Zhone and Affiliates)
- Hotwire 6310 ReachDSL v1 (MVL) Modem Overview
- Getting Started
- Installing the Hotwire 6310 ReachDSL v1 Modem
- Power-On
- Troubleshooting
- HomeLink (for ReachDSL v1 Modems Only)
- Increasing the Number of End-User Systems
- Cables & Connectors
- Optional ReachDSL Modem Wall Placement
- Technical Specifications for Hotwire 6310 ReachDSL v1 Modem
- Important Safety Instructions
- Government Requirements
- Trademarks
- Patent Notification
- Contacting Global Service and Support
- Technical Support
- Service Requirements
14 6310-A4 ReachDSL Modem 6310-A2-ZN12-10
z The Ethernet interface connector uses an 8-pin, non-keyed modular plug.
— To connect the ReachDSL modem to an
Ethernet hub, use the straight-through
connection.
8-Pin Straight-through Connection
–or–
— To connect the ReachDSL modem directly to a PC with an Ethernet NIC card, use an
Ethernet crossover cable.
Pin # Function
1 10BaseT TX D+
2 10BaseT TX D–
3 10BaseT RX D+
4 & 5 Not used
6 10BaseT RX D–
7 & 8 Not used
98-16055a
8-Pin
Plug
Ethernet
Cable
Pin #1
Pin #8
10/100BaseT TX D+
10/100BaseT TX D–
10/100BaseT RX D+
Not Used
Not Used
10/100BaseT RX D–
Not Used
Not Used
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
10/100BaseT TX D+
10/100BaseT TX D–
10/100BaseT RX D+
Not Used
Not Used
10/100BaseT RX D–
Not Used
Not Used
Function Pin # FunctionPin #
8-Pin Ethernet Crossover Cable
99-16518
Pin #1/2 = Orange/White
Twisted Pair
Pin #3/6 = Blue/White
Twisted Pair