Specifications

4. Select the appropriate protocol and define other parameters for the routing rule:
• Source and/or Destination address and/or Subnet Mask
• UDP/TCP Source or Destination port.
• Gateway address or Interface (These can be Active PVCs or Port Mapping Groups)
5. Click Save/Apply.
DSL
The DSL settings page contains sections—modulation and capability—that should be specified
by your ISP. Consult with your ISP to select the correct settings for each.
Click Save / Apply if you are finished or click on Advanced Settings if you want to configure
more advanced settings.
Modulation Methods
The following modulation methods are supported by the 6219-X1 router:
• G.dmt Enabled
• G.lite Enabled
• T1.413 Enabled
• ADSL Enabled
• Annex L Enabled
• ADSL2+ Enabled.
Do not change this setting unless so directed by your ISP.
6219-X1 Router Users Guide 65
Downloaded from www.Manualslib.com manuals search engine