User`s guide

6211 ADSL2+ Router User’s Guide
DSL Advanced Settings
Do not change the DSL Advanced Settings unless so directed by your ISP.
There are five test modes between the router and your ISP:
 Normal test: Puts the router in a test mode in which it only sends a Normal signal.
 Reverb test: Puts the router in a test mode in which it only sends a Reverb signal.
 Medley test: Puts the router in a test mode in which it only sends a Medley signal.
 No Retrain: In this mode the router will try to establish a connection as in normal mode, but once the connection
is up it will not retrain if the signal is lost.
 L3: Puts the router into the L3 power state.
Figure 6-9 DSL Advanced Settings
6211-A2-GB21-20 January 2005 63