User`s guide

6211 ADSL2+ Router User’s Guide
LAN
Local Area Network (LAN) Setup
You can configure the DSL Router IP address and Subnet Mask for the LAN interface to conform your LAN’s IP
Subnet. The Save button only saves the LAN configuration data. The Save/Reboot button saves the LAN
configuration data and reboots the router to make the new configuration effective.
Figure 6-7 LAN Setup
NAT
You can configure the Virtual Server, Port Triggering, and DMZ Host when NAT is enabled.
Virtual Servers
A virtual server allows you to direct incoming traffic from the WAN side to a specific IP address on the LAN side.
Click on the Add button to add a virtual server.
6211-A2-GB21-20 January 2005 41