Datasheet

CHAPTER 7
Call quality commands
60 Vpacket 5100/6100 Series H.323 Telephony
Viewing Call Detail Records
You can view all of the Call Detail Records by issuing the cdr list command. You may view a
specific entry by entering a record number after the command.
Syntax: cdr list [record_no]
Argument:
record_no is the record number of the call that you want to view
Example:
In this example, the CDR table includes:
• an ID for each call (a unique number assigned on a per-session basis)
• the TCID assigned to the call
• Date, Start (Starting Time) and Dur(ation) timestamps
• Dly (delay in making the round-trip, measured in milliseconds)
• Jitter (in milliseconds)
• Pkg (percentage of the packets lost during transmission)
• Coder (the codec assigned to the traffic flow)
• Vqs (the numerical quality of the Voice Quality Service measurement)
• Fjit (the measured Far-End Jitter)
• FPkg (Far-End Packet percentage loss)
• FVqs (Far-End Voice Quality Service measurement)
telephony# cdr list
ID TCID Date Start Dur Setup Dly Jitter Pkg Coder Vqs FJit FPkg FVqs
33 2 5/18 16:57 21162 2834 0 0 0 G.711 4.37 0 0 4.37
34 1 5/18 16:58 12202 2828 0 0 0 G.711 4.37 0 0 4.37
35 2 5/18 16:58 12190 2950 0 0 0 G.711 4.37 0 0 4.37
36 0 5/18 16:58 14204 1804 0 0 0 G.711 4.37 0 0 4.37
37 2 5/18 16:58 14202 1922 0 0 0 G.711 4.37 0 0 4.37