Datasheet

ATPM Telephone Address to Hunting Group
Vpacket 5100/6100 Series H.323 Telephony 53
To view the destination list, issue the atpm dlist command and you will see something similar to
the following example:
Here we see a listing of a fully subscribed VDR having all 12 ports assigned to successive TCIDs;
the 12th destination ID is connected via the H.323 capability to the incoming Ethernet
connection at IP address 192.168.1.1 via TCP on port 1720.
System Parameters
The system-wide parameters are configured with this command:
atpm sys <dial_time> <1st_digit_wait> <inter_digit_wait> <dial_out_code> <area_code>
<office_code> <first_dn> [dial_term_digit]
VPacket(telephony)# atpm dlist
Dest id = 0, Mode = TSGM, TCID = 0
Dest id = 1, Mode = TSGM, TCID = 1
Dest id = 2, Mode = TSGM, TCID = 2
Dest id = 3, Mode = TSGM, TCID = 3
Dest id = 4, Mode = TSGM, TCID = 4
Dest id = 5, Mode = TSGM, TCID = 5
Dest id = 6, Mode = TSGM, TCID = 6
Dest id = 7, Mode = TSGM, TCID = 7
Dest id = 8, Mode = TSGM, TCID = 8
Dest id = 9, Mode = TSGM, TCID = 9
Dest id = 10, Mode = TSGM, TCID = 10
Dest id = 11, Mode = TSGM, TCID = 11
Dest id = 12, Mode = HSMU, Dest = 192.168.11.1/1720 TCP
OK
VPacket(telephony)#
Table 6-5. slist Parameters defined
Parameter Range Description
dial_time 1 to 4294967295 ms Time between going off hook and dialing the
first digit
first_digit_wait 1 to 4294967295 ms Time between going off hook and dialing the
first digit
Inter_digit_wait 1 to 4294967295 ms Time between successive digits