Datasheet

CHAPTER 4
Coding profile commands
32 Vpacket 5100/6100 Series H.323 Telephony
Setting the fax data rate
You can set the maximum data rate for a fax coding profile by issuing the set coding [prof_id]
rate command.
Syntax: set coding [prof_id] rate <rate>
Argument:
rate 2400 | 4800 | 7200 | 9600 | 12000 | 14400 | 5300 | 6300
Example:
In this example, the coding rate for coding profile number 1 is set to 12,000.
Setting the fax packet rate
You can set the rate at which high speed data will be sent across the network for a fax coding
profile by issuing the set coding [prof_id] fax_hs_pkt_rate command.
Syntax: set coding [prof_id] fax_hs_pkt_rate <value>
Argument:
value in milliseconds; 10, 20, 30 or 40
Example:
In this example, the fax high-speed packet rate is set to 30.
VPacket# tel
telephony# set coding 1 rate 12000
OK
telephony#
VPacket# tel
telephony# set coding 0 fax_hs_pkt_rate 30
OK
telephony#