Datasheet

Coding profile command list
Vpacket 5100/6100 Series H.323 Telephony 31
Example:
In this example, the telephony submenu is accessed and then the coding command is entered. The
5100/6100 VDR responds to confirm the action.
Setting the coding usage
You can set the coding usage for either voice or fax use by issuing the set coding [prof_id]
usage command.
Caution. Voice or fax usage are allowed. The 5100/6100 VDR does not allow
modem or data coding profile use.
Syntax: set coding [prof_id] usage <voice | fax | modem | data> <on | off>
Argument:
voice | fax | modem | data
choices of coding profile use
on | off to enable or disable the parameter
Example:
In this example, the coding profile is set to use voice.
VPacket# tel
telephony# set coding 1 coding_type pcm_mu
OK
telephony#
telephony# set coding 2 usage voice on
OK
telephony#
!