Datasheet

Vpacket 5100/6100 Series H.323 Telephony 23
Setting the FXS off hook level
You can set the off hook level by issuing the set tcid [tcid] fxsls offhook_db command. This
command applies only to models with FXS voice interface ports.
Syntax: set tcid [tcid] fxsls offhook_db <value in ms>
Argument:
value in ms
Example:
In this example, the off hook level is set to 3 ms.
Setting the on hook level
You can set the on hook level by issuing the set tcid [tcid] fxsls onhook_db command. This
command applies only to models with FXS voice interface ports.
Syntax: set tcid [tcid] fxsls onhook_db <value in ms>
Argument:
value in ms
Example:
In this example, the on hook level is set to 5 ms.
telephony# set tcid 2 fxsls offhook_db 3
OK
telephony#
telephony# set tcid 2 fxsls onhook_db 5
OK
telephony#