Datasheet

CHAPTER 3
TCID commands
22 Vpacket 5100/6100 Series H.323 Telephony
Setting the caller ID time
You can set the caller ID phone number by issuing the set tcid [tcid] cid time command.
Syntax: set tcid [tcid] cid time <MMDDhhmm>
Arguments:
tcid 0-23; the number of the TCID that you want to set the time for
MMDDhhmm MM=month; DD=date; hh=hour in 24-hour format; mm=minutes
Example:
In this example, the caller ID time and date is set to 4:00 pm on November 23 for TCID 5.
Setting the protocol type
You can set the protocol type by issuing the set tcid [tcid] proto command.
Syntax: set tcid [tcid] proto [emi | emw |emd | fxsls | fxsgs]
Arguments:
emi E & M immediate start
emw E & M wink start
emd E & M delayed start
fxfls FXS loop start
fxsgs FXS ground start
Example:
In this example, the protocol is set to E&M wink start.
VPacket# tel
telephony# set tcid 5 cid time 11231600
OK
telephony#
VPacket# tel
telephony# set tcid 2 proto emw
OK
telephony#