Datasheet

CHAPTER 2
T1 voice interface commands
14 Vpacket 5100/6100 Series H.323 Telephony
Setting the T1 loopback
You can set the T1 loopback by issuing the set t1 loopback command.
Syntax: set t1 loopback [noloopback|payload|line]
Argument:
noloopback | payload | line
Example:
In this example, the T1 port is configured to no loopback.
VPacket# tel
telephony# set t1 loopback noloopback
OK
telephony#