Specifications

9
Installing the Hotwire 5620 RTU
Place the Hotwire 5620 RTU on a flat surface with clearance for the rear connectors.
Connecting the DSL Line in a Home Environment (Phone and RTU in the
Same Location)
Use the supplied RJ11 6-pin cable for the DSL connection. You will also need a multiple
line adapter and a phone filter (see
Phone Filters on page 3).
Procedure
1.
Insert a multiple line adapter into the wall jack.
2.
Insert one end of the cable into the
DSL
jack on the RTU.
3.
Insert the other end of the cable into one of the jacks (
Line 1
or
Line 2
) on the
multiple line adapter.
4.
Insert the line cord from the
LINE
jack on the filter into the empty jack on the
multiple line adapter.
5.
Insert the phone line cord from the phone into the
PHONE
jack on the filter.
POWER
ETHERNET
DSL
Hotwire RTU
01-17036
LINE
PHO
N
E
Multiple
Line
Adapter
Filter