System information

3. Commands
3-72 July 2004 4821-A2-GB21-00
Configure SNTP
This command is used to configure the Simple Network Time Protocol client.
Configure SNTP Enable
Configure SNTP Server Address
configure sntp {disabled | enabled}
Minimum Access Level: Administrator
The configure sntp command determines whether the unit makes SNTP requests.
disabled – The unit does not make SNTP requests. Date and time must be set manually.
enabled – The unit updates the date and time periodically by sending requests to an SNTP
server.
Example:
PDYN# configure sntp disable
configure sntp address {ip_address}
Minimum Access Level: Administrator
The configure sntp address command specifies the IP address of an SNTP server.
ip_address – The address of an SNTP server. The default is 192.5.41.40.
Example:
PDYN# configure sntp address 137.90.127.40