System information

3. Commands
4821-A2-GB21-00 July 2004 3-71
Configure Security MAC Delete
Configure Security MAC Show
configure security mac {port_id} delete {mac_address | all} vlan
Minimum Access Level: Administrator
The configure security mac delete command deletes a MAC address in the table of addresses
allowed to send data to a particular DSL port.
port_id – Identifies the port to be affected. The possible forms of the identifier are described in
Chapter 2, Terminology and Conventions.
mac_address – Specifies a MAC address to be deleted. The address must exist in the table of
addresses for this port. You can display the table using the configure security mac show
command. The address must be in the form xx-xx-xx-xx-xx-xx, where each x is a hexadecimal
digit 0–f.
vlan – Specifies a vlan allowed to send data to the port. Traffic from any other vlan is dropped.
all – Specifies that all MAC addresses defined for the port are to be deleted. The MAC address
filtering feature is disabled for the port.
Example:
PDYN# configure security mac 12 delete 00-01-d2-e4-d3-c1 10
configure security mac { port_id} show
Minimum Access Level: Administrator
The configure security mac show command displays the table of MAC addresses allowed for a
particular DSL port.
port_id – Identifies the port whose table is to be displayed.
mac_address – MAC address allowed to send data to the port.
vlan –Vlan allowed to send data to the port. Traffic from any other vlan is dropped.
Example:
PDYN# configure security mac show