System information

3. Commands
4821-A2-GB21-00 July 2004 3-69
Configure Security IP Max Addresses
Configure Security IP Show
configure security ip {port_id} max-ip {max_ip}
Minimum Access Level: Administrator
The configure security ip max-ip command specifies the number of IP addresses allowed to be
active on a particular DSL port.
port_id – Identifies the port to be affected. The possible forms of the identifier are described in
Chapter 2, Terminology and Conventions.
max_ip – Specifies the maximum number of IP addresses allowed on the port. The valid range is
1–20. The default is 1.
Example:
PDYN# configure security ip 12 max-ip 2
configure security ip {port_id} show
Minimum Access Level: Administrator
The configure security ip show command displays the table of addresses allowed for a
particular DSL port.
port_id – Identifies the port whose table is to be displayed. The possible forms of the identifier
are described in Chapter 2, Terminology and Conventions.
Example:
PDYN# configure security ip 12 show
The output of this command is identical to the output from the show security ip command.