System information

3. Commands
3-64 July 2004 4821-A2-GB21-00
Configure Proxy ARP NHR
Scheduled Configuration Backups
This command sets parameters for automatic configuration backup. This feature
allows the administrator to automatically back up the configuration of the unit on a
scheduled basis. When enabled, auto backup uploads the configuration of each
device according to a schedule selected.
Configure Scheduled Backup Enable
configure proxy-arp nhr {ip_address}
Minimum Access Level: Administrator
The configure proxy-arp nhr command determines the default Next-Hop Router (NHR) address
for all subscriber ports in the system. This value is used by the proxy-arp function.
ip_address – Specifies the IP address of the next-hop router for subscriber ports. .
Example:
PDYN# configure proxy-arp nhr 135.75.90.112
configure scheduled-backup {disabled | enabled}
Minimum Access Level: Administrator
The configure scheduled-backup
command determines whether automatic configuration
backup occurs.
disabled – Specifies automatic configuration backup will not occur. This is the default.
enabled – Specifies that automatic configuration backup will occur.
Example:
PDYN# configure scheduled-backup enabled