System information

3. Commands
3-62 July 2004 4821-A2-GB21-00
Configure Management SNMP NMS Trap Address
Configure Management SNMP Read/Write Community String
configure management snmp nms-traps { traps_address1}... [ traps_address8]
Minimum Access Level: Administrator
The configure management snmp nms-traps command specifies the IP addresses of up to
eight trap managers to which traps are sent.
traps_address1
... traps_address8 – Specifies one to eight IP addresses of traps managers.
Example:
PDYN# configure management snmp nms-traps 135.76.90.90 135.76.91.1
The product sends all traps in SNMPV1 format. It is assumed that all SNMPv2 and V3 Mangers
will accept V1 traps.
configure management snmp private-string { private_community_string}
Minimum Access Level: Administrator
The configure management snmp private-string command specifies the community string for
read-write access.
private_community_string – Specifies the string used for read-write access. It may be up to 32
printable characters. The default is private.
Example:
PDYN# configure management snmp private-string topsecret