System information

3. Commands
4821-A2-GB21-00 July 2004 3-49
Configure Interface DSL Queue
Configure Interface DSL Show
configure interface dsl {port_id:pg} queue {fifo | 802.1p}
Minimum Access Level: Administrator
The configure interface dsl queue command assigns queuing method to be used on the ADSL port
when there is more than one VLAN assigned to the priority group .
fifo – The selected priority group will use a first in first out queuing method
801.2p - The selected priority group will use the priority bits in the VLAN tag as the queuing method.
Example:
PDYN# configure interface dsl 1/1:2 queue fifo
configure interface dsl [port_id] show
Minimum Access Level: Administrator
The configure interface dsl show command displays parameters for a ADSL port without leaving the
configuration mode.
port_id – Identifies the port whose configuration is to be displayed. If no port is specified, the port
currently in configuration mode, if any, is displayed.
Example:
PDYN# configure interface dsl 1/7 show
Output:
The output from this command is identical to the show interface dsl command.