System information

3. Commands
3-48 July 2004 4821-A2-GB21-00
Configure Interface DSL Profile PSD Atur-Max-Tx-Pwr
Configure Interface DSL Profile PSD Atuc-Max-Rx-Pwr
configure interface dsl-profile-psd atur-max-tx-pwr {tx_pwr} {profile_name}
Minimum Access Level: Administrator
The configure interface dsl-profile-psd atur-max-tx-pwr command specifies the ATU-R max nominal
Aggregate Transmit Power, in dBm. Only applicable to ADSL units.
profile_name – Identifies the ADSL profile to be modified.
tx_pwr – Valid choices are 0 to 25.5 dBm, in 0.1-dBm increments.
Example:
PDYN# configure interface dsl-profile-psd atur-max-tx-pwr 25.5 adsl_profile1
configure interface dsl-profile-psd atuc-max-rx-pwr {rx_pwr} {profile_name}
Minimum Access Level: Administrator
The configure interface dsl-profile-psd atuc-max-rx-pwr command specifies the ATU-C max Receive
Power, in dBm. Only applicable to ADSL units.
profile_name – Identifies the ADSL profile to be modified.
rx_pwr – Valid choices are 0 to 25.5 dBm, in .1 increments. 2048 indicates that no maximum receive
power limit is to be applied.
Example:
PDYN# configure interface dsl-profile-psd atuc-max-rx-pwr 25.5 adsl_profile1