System information

3. Commands
3-46 July 2004 4821-A2-GB21-00
Configure Interface DSL Profile Line Target-Margin-Upstream
Configure Interface DSL Profile PSD Atuc-Max-PSD
configure interface dsl profile-line target-margin-upstream {margin} {profile_name}
Minimum Access Level: Administrator
The configure interface dsl-profile-line target-margin-upstream command specifies the SNR margin,
in dB, required at startup for traffic toward the port from the CPE.
profile_name – Identifies the ADSL profile to be modified.
margin – Valid choices are 0–31 dB in 1-dB increments.
Example:
PDYN# configure interface dsl-profile-line target-margin-upstream 3 adsl_profile1
configure interface dsl-profile-psd atuc-max-psd {psd} {profile_name}
Minimum Access Level: Administrator
The configure interface dsl-profile-psd atuc-max-psd command specifies the ATUC max nominal
PSD, in dBm/Hz. Only applicable to ADSL units.
profile_name – Identifies the ADSL profile to be modified.
psd – Valid choices are –60.0 to –38.0 dBm/Hz in 0.1-dBm/Hz increments.
Example:
PDYN# configure interface dsl-profile-psd atuc-max-psd -40.0 adsl_profile1